IMSBC Code
The cargo decides the voyage
A first guide to the International Maritime Solid Bulk Cargoes Code: what it is, why it exists, and what it asks of the people who fix, load and carry bulk cargo.
What is a solid bulk cargo?
Cargo loaded loose, straight into the hold. No bags, no boxes, no containers. Coal, iron ore, bauxite, cement, fertilizer, limestone.
It looks like a pile of rock or powder. The danger is in what it does after the hatch is closed and the ship starts to move.
Where the rules come from
Three questions to ask about any cargo
Where the Code applies
- Every ship that carries solid bulk cargo: SOLAS ships (500 GT and over), and also cargo ships under 500 GT. 1.4.1 SOLAS VI/1
- Grain is outside the Code. It has its own rulebook, the International Grain Code.
- The list of cargoes is not complete. The shipper must give current information for every cargo, listed or not. 1.2.1
INTERCARGO count of bulk carrier losses, 2016 to 2025
From guidance to law
Code of Safe Practice for Solid Bulk Cargoes. Advice only. Nobody had to follow it.
Resolution MSC.268(85) replaces the BC Code.
From this date every ship must follow it.
New cargoes and lessons from casualties are written in.
Law and guidance inside one book
Mandatory
Sections 1 to 10, paragraph 11.1.1, the cargo schedules in Appendix 1 and the shipping names in Appendix 5.
Recommendatory or informative
Sections 11 to 13, Appendices 2 to 4, and four parts of each schedule: Description, physical Characteristics, Hazard and Emergency procedures. 1.4.2
Thirteen sections
How to read a cargo schedule
Which edition applies
Five appendices
May liquefy
Fine particles plus moisture. Looks dry at loading, turns fluid at sea when moisture exceeds the transportable moisture limit.
Shipper must provide
Signed TML certificate and moisture certificate or declaration.
Typical cargoes
Chemical hazard
Dangerous goods in solid form in bulk (IMDG classes), or materials hazardous only in bulk (MHB).
Shipper must provide
Class and UN number or MHB notation, and the chemical characteristics at the time of loading.
Typical cargoes
Neither A nor B
No liquefaction or chemical hazard under the Code. Other risks remain: weight, dust, shifting, damage from water.
Still watch
Tank top loading at stowage factor 0.56 m³/t or less, aerated cement, salt dissolving, silica dust.
Typical cargoes
Same commodity, two groups
Particle size moves a cargo between schedules. Set the sizing and see which schedule applies.
The rule
What chartering should ask for
Hold cross-section at sea
Set the cargo
What happens in the hold
- Ship motion and vibration compact the cargo. The spaces between particles shrink.
- Water in those spaces is squeezed. Pore water pressure rises.
- Friction between particles drops and the cargo loses shear strength. It behaves like a liquid.
- The cargo flows to the low side on a roll and does not come back. List builds until the ship capsizes.
7.2.1 7.2.4
The can test
Half fill a can. Strike it on a hard surface from about 0.2 m, 25 times. Look for free moisture on the surface. 8.4
Three traps
- Wet base. Moisture migrates downward. The average can be under TML while the bottom layer is in a flow state. 7.2.3
- Rain after testing. Significant rain or snow between test and completion of loading means the shipper must show moisture is still under TML. 4.5.2
- Dynamic separation. Water and fines rise as a slurry above the cargo and create a free surface. Named for bauxite fines, and part of the Group A definition since Amendment 06-21.
Clocks that run on every Group A fixture
The one exception
Cargo above TML may be carried only on a ship specially built or fitted to confine cargo shift, with approval from its Administration. 7.3.1.1 7.3.2
How TML is found
Two ways into Group B
Dangerous goods in solid form in bulk
Materials hazardous only in bulk (MHB)
Examples in the Code
Before anyone enters a hold
- Coal, metal sulphide concentrates, ferrous metals, vegetable and forest products deplete oxygen. 3.2.3
- A space tested safe can still have pockets with no oxygen or with toxic gas. 3.2.4
- Self-heating cargo gets surface ventilation only. Air is never directed into the body of the cargo. 3.5.6
Direct reduced iron
Hydrogen above 4% in air is explosive. Water, including sea water, makes DRI produce hydrogen and heat.
Coal watch
What the coal schedule requires now
Can these two share a ship?
9.3.4
Lives lost, cargo-related casualties
The pattern
- Speed. Ships are lost in minutes, often with most of the crew.
- Rain. Exceptional rainfall before loading was a factor in the Bulk Jupiter loss.
- Paper against cargo. Certificates did not describe what was actually loaded.
- Names. A hazardous cargo travelled under a milder description.
- Every loss changed the Code: new schedules, new tests, a wider Group A.
Casualty register
Go or no-go at the berth
What the shipper must tell the master
In writing, before loading, with a signed declaration. 4.2.2 4.2.3
Cargo desk check
Red flags before we fix
- Cargo offered under a trade name. Ask for the Bulk Cargo Shipping Name and group in writing.
- Iron ore, bauxite or manganese ore with no particle size distribution.
- Group A cargo with a TML test older than six months, or moisture sampled more than seven days before loading.
- Certificates from a laboratory the load-port competent authority has not recognised.
- Loading from barges or open stockpiles in the wet season.
- Shipper will not give the ship's representative access to the stockpile. 4.4.3
- Cargo not listed in the Code and no certificate from the load-port authority. 1.3
- By-product fines under a milder name, such as DRI fines sold as HBI fines.
- Fertilizer declared non-hazardous with no composition details.
In the charter party
- Describe the cargo by its Bulk Cargo Shipping Name and group, to be loaded, carried and discharged in accordance with the IMSBC Code.
- For Group A cargoes, use a liquefaction clause such as BIMCO's Solid Bulk Cargoes that Can Liquefy Clause, which covers sampling, testing and refusal of unsafe cargo.
- Agree who carries the time when cargo is retested, dried, rejected or discharged again.
- Check the P&I club's circulars and any notification or pre-loading survey requirement before fixing nickel ore, bauxite or iron ore fines.
- The master's refusal to load stands. No voyage instruction overrides it.
Why this is an operations matter
A wrong group at fixing becomes a rejected cargo at the berth, a ship waiting on laboratory results, or a casualty. The cheapest moment to ask for sizing and certificates is before the fixture.
Thank you. Questions?
Four things to take back to the desk.